​Premium Series

• Bitzer Ecoline semi-hermetic compressor(s) with spring mounted vibration insulation, crankcase heater and internal thermal protection. For Extra “X” Low application temperature, a Bitzer two-stage semi-hermetic compressor is used.

• Step unloader(s) on each compressor (4 cylinders: 50-100%, 6 cylinders: 33-66-100%).

• Aluminum structure with galvanized steel reinforcement, high efficiency condenser with reinforced structure and aluminum micro-channel coils. Its low weight and size reduces the costs of transportation, installation and construction.

• Galvanized and powder coated weatherproof cabinet.

• EcoFriendly; Air cooled micro-channel condenser coil with internal volume reduced requires between 40% and 60% less refrigerant charge and results in a significant reduction of the refrigerant charge necessary for normal or flooded operations.

• Wide range of SST (Saturated Suction Temperature).

• Top and rear fan covers are designed to be easily interchangeable.

• Quiet, high efficiency, external rotor motor, AC type axial fan(s) for a better operation, configured in a vertical position.

• Vertical liquid receiver with inlet and outlet insulate valves, stainless steel relief valve at 450 PSI and electronic low liquid level indicator.

• Liquid sight glass and solenoid valve.

• Sealed suction filter and liquid drier for single compressor units. Replaceable core filter for units over 15 HP and all units with dual and triple compressors.

• Suction accumulator.

• Flexible joint on suction and discharge lines on each compressor.

• Helical oil separator with discharge check valve and replaceable 5 micron oil filter, additionally, for units with dual or triple compressors, built-in oil reservoir.

• Electronic oil level regulator for units with dual or triple compressors.

• Electronic oil pressure switch.

• Refrigerant: R-404a

• Factory pre-charged with nitrogen and electrical work tested.

• UL 508A listed built-in electrical control panel.

• Compressor and fan circuit breakers.

• Voltage and phase-loss monitor with protection module for each compressor.

• Control: 208-230V / 1PH / 60HZ

• Power Supply Voltage 208-230V / 3PH / 60HZ with single point power connection.

• Electronic Control System; compressor(s) and condenser fan(s) operational management: alarms, measurement of pressure and temperature variables, 132x64 LCD backlit built-in display with 6-button keypad.

• Alarm management: 3 alarms per compressor(s) (overload, pressure and oil) and 1 overload alarm for condenser fan(s).

• Fixed high pressure controls on each compressor.

• BMS (Building Management System): ModBus protocol for supervisor or HMI (Human Machine Interface).

• 2-year warranty.

​Standard Series

• Bitzer Ecoline Semi-Hermetic compressor(s) with spring-mounted vibration insulation, crankcase heater, and internal thermal protection.

• Aluminum structure with galvanized steel reinforcement, high-efficiency condenser with reinforced structure, and aluminum micro-channel coils. Its low weight and size reduce the costs of transportation, installation, and construction.

• A galvanized and powder-coated cabinet designed for outdoor use.

• EcoFriendly; Air-cooled micro-channel condenser coil with internal volume reduced requires between 40% and 60% less refrigerant charge and results in a significant reduction of the refrigerant charge necessary for normal or flooded operations.

• Wide range of SST (Saturated Suction Temperature).

• Quiet, high efficiency, external rotor motor, AC-type axial fan(s) for better operation.

• Vertical liquid receiver with inlet and outlet insulate valves, stainless steel relief valve at 450 PSI.

• Sealed suction filter and liquid drier for single compressor units. Replaceable core filter for units over 15 HP and all units with dual and triple compressors.

• Flexible joint on suction and discharge lines on each compressor.

• Helical oil separator with discharge check valve, replaceable 5-micron oil filter, and built-in oil reservoir for units with dual or triple compressors.

• Electronic oil level regulator for units with dual or triple compressors.

• Electronic oil pressure switch.

• Refrigerant: R-404a

• Factory pre-charged with nitrogen and electrical work tested.

• UL 508A listed a built-in electrical control panel.

• Compressor and fan circuit breakers.

• Voltage and phase-loss monitor for each compressor.

• Control: 208-230V / 1PH / 60HZ

• Power Supply Voltage 208-230V / 3PH / 60HZ with single-point power connection.

• Electronic Control System; compressor(s) and condenser fan(s) operational management: alarms, measurement of pressure and temperature variables, 132x64 LCD backlit built-in display with a 6-button keypad.

• Alarm management: 1 general alarm for the compressor(s) and 1 overload alarm for condenser fan(s).

• Fixed high-pressure controls on each compressor.

• BMS (Building Management System): ModBus protocol for supervisor or HMI (Human Machine Interface).

• 1-year warranty.